Grounded Conductive kits For Health & EMF Protection Earthing Pillow Case 50*75CM
WELCOME TO THE FUTURE OF SLEEP
Our Earthing pillow case is made from conductive material of 95% cotton with 5% silver grid woven in. It is durable and will hold up to hundreds of washing and dryings on the low heat setting.Our kit incorporates a 98k ohm resistor that acts as a safety fused link but more importantly it creates a more organized exchange of Earths electrons and better grounding effect. There is definitely a more powerful feel with a 98k ohm resisted link. Extensive research has shown that a 98k ohm resistor matches the same ground potential of the human body for a better results.
2 * 75*50cm Conductive pillow case
2 * 5meters connect cable with proven 98k ohm safety fused resistor
2 * Plug adapter ( EU / UK / AU plugs for choose,others will not include the plugs)
Shields Cell Phone Radiation
Who needs cell phone shielding in a pillowcase? If you know anyone who puts their phone under their pillow (where it can radiate their sleeping brain all night), they really need this shield. Benefits both teenagers and adults alike. Both luxurious and practical it looks and feels like a normal white pillowcase. Cotton based, machine washable (no bleach!) but with superfine silver fibers (you need a microscope to see them) woven into it. Each layer provides ~90% signal reduction, and there are two layers in a pillowcase! Phone function and sound quality are not affected. Finished size is 20x30 inches, for Standard pillows. 22 x 38 inches for King size. You can put an ordinary pillowcase over this one if you want to wash it less. Note: we don’t recommend having a cell phone anywhere in the bedroom. But if you must, shield wisely.
Earthing Kit has a great amount of health benefits:
Some of the health benefits, many people have reported and written about are:
Better sleep quality
Protection against environmental electrical fields
More efficient function of the cardiovascular, respiratory and nervous system
Faster recovery from trauma
Accelerated wound healing
Relief of muscle headaches and muscle tension
Reduced menstrual symptoms
Reduced or eliminated chronic pain
HOW TO USE THE EARTHING Fitted sheets.
Step 1: Check Your Outlets For Ground
In order to use your Earthing product, you must connect it to the “ground port”
of a grounded 3 prong outlet. Before plugging in your Earthing product,
you must check that the outlet is grounded by plugging in the outlet checker.
Step 2: Setting Up The Fitted Sheet
1. Place the Earthing sheet over your mattress and stretch each corner gently to fit contour of the mattress, as you would any fitted bottom sheet.
2. Insert one end of the Earthing cord into the ground port (third hole) of a properly grounded wall outlet or connect to cord of an Earthing ground rod placed in the Earth outside.
3. When you lie down on the connected sheet, any bare skin contact will transfer the Earth’s energy to your body once you connect the sheet.
Step 3: How To Wash and Care For Your Earthing Fitted Sheet
It is good to wash your Earthing® product. It will not be harmed by washing,
in fact it is beneficial. Washing in warm water strips body sweat
and natural skin oils from the silver keeping it conductive. When needed hand
wash the bands in warm water with a mild soap. Air dry only.
Do not use the bands on parts of your body where you have applied any creams
as these substances can reduce conductivity and oxidize silver fibers.
WASH in a washing machine with warm water
WASH with towel or linens for optimal silver shine
DRY in a dryer on low or line dry
Use a liquid laundry detergent
It is good to wash your pillowcase. It will not be harmed by washing,
in fact it is beneficial. Washing in warm water strips body sweat and
natural skin oils from the silver keeping it conductive.
Don ’t wash with bleach
Don ’t wash with fabric softeners
Don ’t use whitening detergents, oxi-detergents OR detergents with oils like lavender or coconut oil
Don ’t use dryer sheet fabric softeners
Bleach, lotions and oils can tarnish the silver rendering it non conductive.
Fabric softener builds up on the silver and also ruins its
conductive properties. It is advised to wait one hour to use the product after
applying lotion to the skin. Iron using low heat.
A note about washing shielded bedding:
Please note that some shielding fabrics are not washable at all, and some can be hand washed only. Please read and follow washing instructions that come with your product.
Poor water quality will damage Silver.
In particular Sulphur, high Fluoride, and low pH will react strongly with Silver and destroy conductivity and shielding performance.
Test your tap water on a small fabric swatch before washing your fabric/garment:
1- soak a small fabric swatch in tap water for 1 hour.
2- look for color change in the water or swatch, especially blackening.
3- air dry the swatch and check for conductivity (by touching an Ohm meter to 2 points on the fabric)
If color change or loss of conductivity occurs, DO NOT use tap water to wash/rinse your fabric. Use distilled or deionized, reverse osmosis water.